QUICK START
Typical usage of kits
First demonstration
RF link check:
•
Unpack two DCTR transceivers from the development set. Do not make any changes in SW inside.
•
Plug the TR modules to both DK-EVAL-04A kits and switch the power on by jumpers.
•
Bidirectional RF link is automatically established between the kits. Red LED flashing indicates RF connection.
•
You can move the kits and check RF link with respect to given environment.
Note:
This link works plug and play thanks to the E09-LINK program which is uploaded in all TR modules in
development sets delivered from the factory. It is one of Basic examples from the Startup package and can be
uploaded whenever needed later on.
Point-to-point
Arrangement with two DK-EVAL-04A kits see above.
Arrangement with CK-USB-04A:
See Basic examples E01-TX, E02-RX, … in IQRF Startup Package.
Network
For networks, it is recommended to apply ready-to-use hardware profiles, which is much easier than writing one's
own user-specific application. See chapter
Quick start with HWP without programming
.
© 2015 MICRORISC s.r.o.
www.iqrf.org
Quick_Start_Guide_IQRF_ 150805
Page 5