5.
If mounting the unit outdoors, please take necessary and thorough
measures to ensure the camera unit is properly sealed from inclement
weather. An example would be to use silicone sealer around the back of
the base, being sure to surround all holes with a generous bead of sealant
to the outer edge of back box surface. You should use a sealing method
you are familiar with and which conforms to any local, state, county and
country requirements and laws.
BLINK PATTERNS
Your IQeye Sentinel all-weather megapixel camera is equipped with two status
indicator LEDs that can be seen on the back of the Sentinel enclosure. During
normal operation, the following colors and patterns should be visible
If your Sentinel camera fails to power up or indicate a network connection or
show activity, please contact IQinVision technical support for assistance.
Status
Left LED
Right LED
Connected to the network
Solid Yellow (10 base)
Green 2-second
but no network activity
Solid Green (100 base)
blinking pattern
Connected to the network
Intermittently blinking
Intermittently blinking
with network activity
between red/green
between red/green as
as activity occurs
activity occurs
Connected but no power
Dark
Dark
10
Figure 11
