2
Important Safety Instructions
Read and save these instructions
Danger
Never immerse the product in
water.
Do not allow any kind of liquid to
spill on, enter or come into
contact with the product,
including, but not limited to water,
detergents or flammable solvents.
Do not spray any flammable
materials such as insecticides,
fragrance or perfumes into or
around the product.
Warning
This appliance can be used by
children aged 8 years and above
as well as by persons with
reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge only
when supervised or instructions
concerning the safe use of the
appliance have been given by a
person responsible for their safety
and the hazards involved are
understood.
Children shall be supervised to
ensure that they do not play with
the appliance.
Cleaning and user maintenance
must not be performed by
children without supervision.
Prior to cleaning or other
maintenance like replacing filters,
the
appliance
must
be
disconnected from the supply
mains.
Do not use the product if the plug,
the supply cord, or the appliance
itself is damaged. If the supply
cord is damaged, you must have
it replaced by IQAir, a service
center authorized by IQAir, or
similarly qualified persons in
order to avoid a hazard.
Do not place the product in an
area where it can be affected by
dripping condensation, e.g.
directly below an air conditioner.
Do not place the product in or
below an open window.
Check that the voltage and
frequency indicated on the
product corresponds to the local
mains voltage and frequency
before connecting. Only plug the
product into a suitable and easily
accessible mains socket.
For USA and Canada: This
appliance has a polarized plug
(one blade is wider than the other).
To reduce the risk of electric
shock, this plug is intended to fit
in a polarized outlet only one way.
lf the plug does not fit fully in the
outlet, reverse the plug. lf it still
does not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
For Canada: This appliance is not
suitable for use with solid-state
speed controls.