iQ426
HEPA
Operator’s Manual
888-274-7744
www.iqpowertools.com
En
gli
sh
7.1
FILTER MAINTENANCE
iQ426HEPA™ Dual Filter System
The dual filter system of the iQ426HEPA uses both an
iQ Durabond filter and a HEPA filter.
CLEANING THE DURABOND FILTER
Spin filter 3-5 times before emptying tub.
NOTE: Machine must be turned off before cleaning filter.
REPLACING THE IQ DURABOND FILTER
Spin filter knob 5 times to ensure all dust is released.
While dust settles, remove the 5 screws around the
filter cover.
Remove filter cover and filter.
Put in new filter and cover with filter cover. Note: the
cover should be attached at the same position as in
image below. Replace the 5 screws.
REPLACING THE HEPA FILTER
When the HEPA filer light turns red, it is time to change
the filter. To change the filter, first remove the dust
extractor from the cart by releasing the lever on the left
side of cart
