Product Description of BRT-601
Page 4 of 5
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
Control using wall mount unit:
There are 4 touch pads on the front panel. Pressing each touch
pad will turn on or turn off the fan or the lamp.
FAN:
Pressing once will turn on the fan, and pressing again will turn off the fan;
LAMP 1:
Pressing once will turn on lamp 1, and pressing again will turn off lamp 1;
LAMP 2:
Pressing once will turn on lamp 2, and pressing again will turn off lamp 2; and
LAMP 3:
Pressing once will turn on lamp 3, and pressing again will turn off lamp 3.
Also, pressing a touch ypad to turn on a load will cause the touch pad to flash briefly.
One touch pad operation to turn off all the loads in the same time:
Pressing and holding the
FAN touch pad for 2 seconds will turn off all the loads in the same time.
Control using remote:
There are 5 buttons on the remote. Pressing each button will turn on or
turn off the fan, or turn on or turn off the lamp.
FAN:
Pressing once will turn on the fan, and pressing again will turn off the fan;
LAMP 1:
Pressing once will turn on lamp 1, and pressing again will turn off lamp 1;
LAMP 2:
Pressing once will turn on lamp 2, and pressing again will turn off lamp 2;
LAMP 3:
Pressing once will turn on lamp 3, and pressing again will turn off lamp 3; and
OFF:
Pressing this button will turn of all the loads in the same time.
Set up delay-off function:
Use a screwdriver to pry off the back cover to access the dip
switches as shown in Fig. 6. Switching a dip switch to on will set up the corresponding load for
delay-off operation respectively.
Fig. 6
Dip Switches for Activating Delay-off Time
Dip switch 1 = Lamp 1
Dip switch 2 = Lamp 2
Dip switch 3 = Lamp 3
Dip switch 4 = Fan
