IPTC Albatross™ DEX28-GE2P – Quick Installation Guide
7
System Configuration Using Web Browser
You can use web browser to configure the gateway. The configuration software runs on Netscape 4.0+, and on
Internet Explorer version 5.5 or later.
To configure the gateway, open the web browser and type in IP address of the gateway in address field. Following
DEX28-GE2P welcome screen should appear:
Select “
Configure
device…
” option, and type in username and password, then click OK.
If you have not set a System password before, the device will accept the default password “
admin
” and username
“
system
”. Remember that all passwords and usernames are case sensitive.
If you have changed the System password but cannot remember it, then you should configure device over serial
(RS232) cable connected to CONSOLE port. Configuration over serial port allows resetting System password to
default value system/admin.
(1) Enter IP address of the DEX28
t
(2) Click here