background image

FXO2 

User Guide ver. 1.1 

Autotranslation, no pics 

 

2 SIP, 2xRJ45, 4xRJ11 

Pre-version userguide 

page 12 of 13 

 

© IPshop ApS 2009 

I:\FAQ\FXO2\userguide\FXO2_UG_EN.doc Ver. 1.1 

 

Choice Static IP when network needs a static IP and fill in the messages of then. 

3

) 

PPPoE 

PPPoE, point-to-point protocol over Ethernet, is a network protocol for encapsulating 
PPP frames in Ethernet frames. It is used mainly with cable modem and DSL (Digital 
Subscriber Line) services. Click PPPOE, and fill in the user name and password 
accurately. 

4

. Advance… 

Click Advance and you will get the two items: Hardware address and Broadcast 
address. 
Fill in if the MAC address and broadcast need to change to specify. 

3.7.2 PC port configurations 

PC port can setup into Bridge Mode or Static IP

. Strongly recommend user using 

static IP mode because of in bridge mode PC port don’t has a IP for login the 
configuration page. 
The default setting is Static IP in 192.168.8.1. 

1

) 

Bridge Mode 

In the Bridge Mode, PC port is link to LAN port with a internal switch, device which 
connect to PC port same as connect to the LAN cable. 

2

) 

Specify an IP Address Manually 

Click Static IP, and enter IP Address and Subnet Mask. 

3

) 

Enable DHCP Service 

When users enable the DHCP service, PC port become a DHCP server and offer 
DHCP service. Please also fill in the starting address and ending address of the 
DHCP service. If the LAN port setting to static IP and user want to offer DNS field in 
DHCP please also fill in the DNS server IP address. 

4

) 

Advance… 

Click Advance and you will get the two items: Hardware address and Broadcast 
address. 
Fill in if the MAC address and broadcast address need to change to specify. 

3.7.3 Primary DNS 

When LAN port is setting to static IP DNS must be set. If there is not DNS IP filled FXO2 
and the device(S) behind the FXO2 can not access any address with 

Domain Name

3.7.4 Secondary DNS 

Fill in a backup DNS server IP address here. 

3.8 Save Configuration 

Once a change is confirm, users should click on the “Save Configuration” button in the 
Configuration page. Otherwise, your configuration will not take effect. After user click the 
“Save configuration” the screen will be: 

 

3.9 Discard Changes 
3.10 Tools Menu 

Click on the “Tools”, the web page will pop-up a subordinate options and the screen will 
be 
displayed as below: 

3.10.1 Online Upgrade 

WARNING! Performing an online upgrade is for experienced users or 
administrators only! 

Click Online Upgrade. Enter the update link which provide by Manufacturer like: 

http://217.196.136.145/update/A34HS-3.07-18.pkg

, 

And click the Start button. 

Summary of Contents for FXO2














Reviews: