RACK TOWER ONLINE UPS
4.011.2017
RTS-ON-user-manual_ENG-R1
17
V
2 5 %
5 0 %
7 5 %
1 0 0 %
2 5 %
5 0 %
7 5 %
1 0 0 %
ST
DB
Y
4.6.5 Frequency converter mode setting
①
CF mode only can be set in STDBY mode. In STDBY mode, enter the setting interface. Press and hold the
function setting key
for more than 2 seconds, then come to setting interface, Press and hold the inquiring
key (
,
)
for more than half a second(less than 2 seconds), select the function setting, choose battery
voltage setting interface, at the moment, the letters “CF” will flash.
②
Enter the CF setting interface. Press and hold the function setting key
for more than half a second(less than
2 seconds), then come to setting interface of CF, at this time, the letters “CF” will not flash any more. The “ON”
(or OFF) will flash. Press and hold the inquiring key (
,
)
for more than half a second (less than 2
seconds) to determine whether th
e CF function is used or not. If used, the corresponding word is “ON”, if not, the
word is “OFF”. It can be determined by yourself.
③
Confirm the CF selecting interface. After selecting ON or OFF, press and hold the function setting key
for
more than half
a second (less than 2 seconds). Now, the CF setting function is completed and the “ON” or “OFF”
will light without flash.
④
Exit from the setting interface. Press and hold function setting key
for more than 2 seconds, exit from the
setting interface and return to main interface.
⑤
After setting CF at
“ON”, UPS would be back in STDBY Mode. The default value of CF is OFF.