RACK TOWER ONLINE UPS
4.011.2017
RTS-ON-user-manual_ENG-R1
16
④
Exit from the setting interface. Press and hold function setting key
for more than half a second (less than 2
seconds), exit from the setting interface and return to main interface.
2 5 %
5 0 %
7 5 %
1 0 0 %
2 5 %
5 0 %
7 5 %
1 0 0 %
ST
DB
Y
2 5 %
5 0 %
7 5 %
1 0 0 %
2 5 %
5 0 %
7 5 %
1 0 0 %
ST
DB
Y
4.6.4 Low voltage of battery setting
①
Enter the setting interface. Press and hold the function setting key
for more than 2 seconds, then come
to setting interface, Press and hold the inquiring key (
,
)
for more than half a second(less than 2
s
econds), select the function setting, choose battery voltage setting interface, at the moment, the letters “bat” will
flash.
②
Enter the battery voltage selecting interface. Press and hold the function setting key
for more than half a
second(less than 2 seconds), then come to setting interface of battery voltage, this time, the numerical value will
flash. Press and hold the inquiring key (
,
)
for more than half a second (less than 2 seconds), select the
numerical value in accordance with “battery” function. The provided voltages are 10V, 10.2V, 10.5V, numbers
stand for the voltage of each battery, you can choose anyone by yourself (The default is 10V), anyone has been
chosen, under BAT mode, UPS will shutdown when its battery voltage achieve the voltage you chose.
③
Confirm the battery voltage selecting interface. After selecting numerical value, press and hold the function
setting
, for more than half a second (less than 2 seconds). Now, the battery setting function is completed
and the numerical value will light without flash.
④
Exit from the setting interface. Press and hold function setting key
for more than half a second (less than 2
seconds), exit from the setting interface and return to main interface.
