01.05/WE
23
ORGAPACK CR 25 A
Tensioning
– Press the green button completely down with the
thumb of the right hand. Release green button. The
strap is tensioned until the air motor stops.
The tensioning force can be infinitely
adjusted (see chapter 7.1).
Interrupting the tensioning process
– Press catch (7/2) to the left, green button rises and
tensioning is interrupted.
If the items to be strapped are mainly
delicate products, it is recommended to
remove the catch. The green button will then no
longer be locked when pressed down.
Sealing
– Press the yellow button (8/1) with the right thumb
until the seal is notched and the strap is cut off.
– Raise the motor to the stop and swivel the tool
away from the strapping to the right at the rear.
Check of seal
To obtain the maximum seal efficiency, the notches
have to be cut properly into the seal. If these notches
are not correctly cut, replace jaws and notcher (see
Chapter 7.5).
Fig. 7
Fig. 8
1
2
1
