01.05/WE
21
ORGAPACK CR 25 A
5
INITIAL OPERATION
5.1 SUSPENDING THE TOOL
If the tool is equipped with a suspension bow (3/1) it
can be suspended on a spring balancer. By mounting
an M6-eye bolt (3/2) it is possible to perform horizontal
strapping.
5.2
COMPRESSED-AIR CONNECTION
Motor and sealing piston are lubricated by oil mist of
the compressed air. Properly prepared compressed
air is therefore essential for trouble-free operation of
the tool. This can only be ensured by a reliably
functioning maintenance unit, consisting of water
separator, pressure reducing valve with pressure
gauge and oil mist lubricator.
The oil mist lubricator should supply sufficient oil. The
length of the hose between the CR 25 A and the main-
tenance unit should not exceed 5 m (15 ft). The
internal diameter of the pipe should be at least 10 mm
(
3
/
8
“). It must be ensured that the hose does not form
loops, where oil can collect.
Fig. 3
1
2
