iPROTECT 1217, Manual

Page: 9 / 16

Start working with the iProtect 1217 by adjusting the device to the frequency allocation in the
country of use. As mentioned above, every country has its own frequency allocation for bands
of mobile communication and wireless devices. Frequencies such as 4G/LTE, 5G and other
bands can differ significantly in different parts of the world. The iProtect 1217 can detect signals
in almost all bands, however, in order to ensure the maximum probability and speed of detec-
tion, as well as to avoid false responses, the device should be adjusted purely to the bands
which are used in the country.
Press the BANDS button in order to enter the adjustment mode.
9
BAND ADJUSTMENT
A group
An active band Selected region Non-active band
Move the joystick in order to go left, right, up, down or press it in order to activate or
deactivate certain items. To exit, press the BACK button.
Start by choosing the region, and then go down to select, or unselect, groups or certain
bands. Select
US if the country of use is the USA, Caribbean or Latin American countries. Select
EU if the device is in a European countr y, or any other country that a similar frequency distribu-
tion is used. Select TOTAL in order to open the full list of bands and to select them manually.
Follow the "Table of Bands" attached to these instructions in order to edit the list of bands in
the device. Always try to set all the bands which are allocated in the country of use, and to de
activate those bands which are not used. If necessar y, when a specific task arises, it is possible
to switch off certain bands or groups temporarily. For instance, if you want to detect only Wi-Fi,
Bluetooth and LoRa signals, or mobile communication only. Deactivation of other band groups
will cause an increase in the probability of detecting active bands and will speed up the search.