background image

F:

TRACKER

In  this  mode  a  search  for  GPS  trackers (beacons) on vehicles or other mobile devices can be 
performed.
The  measuring  is  performed  on  active  mobile  bands only, that is, those belonging to MBL1, 
MBL2, MBL3 and MBL4 groups.

The  histogram  is  displayed,  which  enables  you  to not miss short-time signals and to see an 
increased time period (1 minute).

The histogram

The period 
between 
the responses

The level 
bargraph

The alarm 
threshold Al.

The alarm threshold

 can be adjusted, and the 

ALARM

 and 

AUDIO

 functions can be switched on.

A subsequent 

pressing of the joystick button

 selects the ALL BANDS mode.

Connect the high-frequency antenna LPDA-12 to the left socket, and the rod antenna – to the 
right socket. If necessary, connect the device to its charger and recharge it for some time.

Searching for covert surveillance devices

Switch  off  all  the  known  radio  frequency  devices  which  are  situated  in  the  target 
premises and nearby, including mobile telephones, Wi Fi routers, radio telephones, 
devices with Bluetooth and others. This will enable the avoidance

 

of interference, 

reduce the number of false responses and increase the probability of detection of 
a real dangerous signal. 

12

RECOMMENDATIONS FOR USE

In addition to the level bargraph, a 

histogram

 is displayed in this mode. The histogram is a 

graph  where  the  history of the signal level for a certain time period is shown. It allows you to 
not miss the signal when you approach, or move away from the transmitter, or when it has a 
non-continuous mode of operation.

The alarm threshold

 can be adjusted, and the

 ALARM

 and 

AUDIO

 functions can be switched on.

A subsequent 

pressing of the joystick button

 selects the TRACKER mode.

Summary of Contents for 1217

















Reviews: