iPROTECT 1217, Manual

Page: 10 / 16

When the bands have been adjusted, you can proceed with working. The iProtect 1217 detector
has several searching modes.
OPERATION MODES
ALL BANDS
This is the main searching mode that enables the detection of all mobile and wireless
signals. Use this mode as the main one for all search tasks.
The selected group Bands of the selected group
The level
bargraph
The group
The alarm
threshold Al.
The groups will be displayed at the bottom of the screen. The signal levels by groups are dis-
played on the bargraphs. By pressing
the joystick to the left and right, the user can choose
a group and see which bands belong to it.
It is possible to set the alarm threshold Al by pressing the joystick up and down . In case of
a signal exceeding the threshold, an alarm indication and alarm sound can be displayed
(
ALARM and AUDIO functions).
A subsequent pressing of the joystick button selects the GROUP mode, in which the operator
can inspect the bands belonging to the group.
10
Press SAVE in order to save the results of the adjustment. If the changes are not saved, the
device will work with the new settings until the power is shut down, then any previous settings
will be chosen when next used.
You can switch on, or off, all of the group altogether by pressing the joystick when you are
hovering over it (MBL1, MBL2, MBL3, MBL4, DECT, ISM, BT-WIFI). If you want to switch on, or
switch off a certain band, simply go to it with the help of the joystick and then press it.