PARTS DESCRIPTION
High-sensitive RF antenna
Attenuator function
16-segment bargraph
Power on/off
Vibrating and audio modes
172
mm
1
9
mm
The iProtect 1215 microwave pointer has
a
16-segment
bargraph
indicator
which
allows
the operator to see the slightest changes in the
level and, as such, accurately find the area with
the strongest signal for location.
When
it
is
necessary
to
decrease the sensitivity,
typically during the location process, the operator
can use the attenuator function ATT.
The working mode (Vibrating/Audio/Normal) can
be selected by the MODE button. The vibrating
When the battery becomes low, the power
indicator changes its color from green to orange.
When the battery is about to discharge complete
-
ly, the power indicator becomes red.
The power can be turned on and off with the help
of the button on the bottom tip of the detector.
The battery compartment is also situated here.
mode allows the user to 'feel' the increased level
without actually watching the bargraph. This is
convenient
during the process of inspecting hard
to access places like gaps under/behind furniture
and construction. The Audio mode helps the user
to identify signals in many cases.
4
5
The iProtect 1215 has a 'physical' (as in profes
-
sional
communications)
RF
attenuator
of a level
up to -20dB. The corresponding indicator will
show the attenuator status.
CONTROLS
