3.3 Daily maintenance check
1. Ensure sufficient lubricant in the air lubricator.
2. Keep the packing cup 1/2 filled with a suitable fluid to ensure the piston rod remains
clean and lubrication is supplied to the packing.
3. Drain any moisture trapped in the air pressure cylinder.
Note: Clean and flush the pump thoroughly with appropriate cleaning fluid to
maintain the maximum service life of the equipment.
3.4 Disassembly procedure
1. All inlet/outlet hoses should be removed and the pump moved to a suitable work area.
2. Clamp on the outlet housing with the outlet hole against one of the jaws of the vice.
Alternatively, a pipe clamp may be utilized instead of a vice. When clamping the
housing, it becomes possible to remove either the air cylinder or the lower tube and/or
foot valve.
3. Remove the foot valve, while holding the air cylinder with a strap wrench as shown.