IPG INTERPACK USA 2024-BFF, Operations Manual & Parts List

Page: 16 / 72

UM136TW UDM136-01
15
S
ET
-U
P
P
ROCEDURES
3) Width Adjustment Handle
The foldable handle that is
used to adjust the width of
the self-centering side rails
is located on the left hand
side of the machine.
Unscrew and change
sides.
Figure 9
4) Tape Loading and Threading
A) Tape Loading
W
ARNING
! T
URN OFF ELECTRICAL POWER SUPPLY AND DISCONNECT THE POWER CORD
FROM THE ELECTRICAL SUPPLY BEFORE BEGINNING TO WORK ON THE
T
APE
H
EADS OR TO LOAD TAPE
. I
F POWER CORDS ARE NOT DISCONNECTED
,
SEVERE INJURY TO PERSONNEL COULD RESULT
.
The HSD2000

- 48 tape heads accommodate 2-inch wide tape rolls; while the optional
HSD2000

- 75 tape heads accommodate 3-inch wide rolls. See the label on the side of
the HSD2000

tape head for the loadable tape sizes.
Push the roll of tape onto the mandrel with the adhesive side up (refer to threading
diagram on the HSD2000

tape head) until the core is set against the mandrel flange.
This ensures the tape will be aligned when feeding into the tape head.