operating modes
RUN-Mode
Normal operating mode
At power on the unit is in the RUN-mode. It carries out its measurement and evaluation
functions and provides output signals according to the set parameters.
The display shows the current system temperature. The red LEDs indicate the switching
state of the outputs.
display mode
Display and adjustment of the switch-points, release positions and of the hysteresis.
When the
Enter/Set
button is pressed briefly, the main menu opens. The internal sens-
ing, processing and output functions of the unit continue as if in RUN-mode. The pa-
rameter values can be read and adjusted.
Pressing the arrow key „downwards“ briefly, scrolls through the adjustable parameters.
Pressing the
Enter/Set
button briefly, shows the adjusted parameter value.
Pressing the arrow key „downwards“ or „upwards“ briefly, changes the parameter value
step by step. Pressing the arrow key continuous changes the value fast.
Pressing the
Enter/Set
button safes the adjusted value, the display blinks three times.
The unit now operates with the „new adjusted“ value.
Returning to the RUN-Mode: Press the
ESC
button.
Enhanced menu / programmimg mode
Setting of the parameter values and programming the main functions.
The unit changes to the programming mode if „EF“ is set in the main menu and the
En-
ter/
Set button is pressed for at least 5sec
.
The internal sensing, processing and output functions of the unit continue as if in RUN-
mode.
Pressing the arrow key „downwards“briefly, scrolls through the adjustable parameters.
Pressing the
Enter/Set
button briefly, indicates the adjusted parameter value
Pressing the arrow key „downwards“ or „upwards“ briefly, changes the parameter value
step by step. Pressing the arrow key continuous changes the value fast.
Pressing the
Enter/Set
button safes the adjusted value, the Display blinks three times.
The unit now operates with the „new adjusted“ value.
Returning to the RUN-Mode: Press the
ESC
button several times.
MANUAL • Subject to alteration! Version:
June 2017
ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
[email protected] • www.ipf-electronic.com
11