LIP-7024LD
User
Guide
3.3
Using Answering Machine Emulation (AME)
When a call is connected to your voice mail, you can screen the call as
with a normal Answering Machine. The caller’s voice is played over
your speaker while the message is being recorded. There are two
methods of notification and call screening provided, Ring or Speaker
mode.
Ring mode
—the AME (Answering Machine Emulation) Flex button will
flash to notify you of a call. You may press the Flex button to hear the
caller as the voice message is stored.
Speaker mode
—when the call is sent to the voice mailbox, the caller’s
voice is automatically broadcast over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice mail to record a
message, talk with the caller and record the conversation in the mailbox,
or answer the call and disconnect the Voicemail. The AME feature is
only available when using the iPECS VMIM/VSF Voice Mail; a
M
UTE
and
AME
button are required.
OPERATION
To assign an AME button:
Ring Mode –
•
TRANS
/
PGM
+
FLEX
+ 564 + 0 +
HOLD
/
SAVE
Speaker Mode –
•
TRANS
/
PGM
+
FLEX
+ 564 + 1 +
HOLD
/
SAVE
To screen a call in Ring mode:
•
Press the flashing
AME
button, the caller’s voice is broadcast over the
station speaker and stored in the voice mailbox (in the Speaker
mode, broadcast is automatic).
To stop the voice broadcast and leave the caller in Voice Mail:
•
Press the illuminated
SPEAKER
button.
To talk with the caller and record the conversation in Voice Mail:
•
Press the Mute Soft button.
To answer the call and cancel the voice message recording:
•
Press the illuminated
AME
button, the caller is connected and the
Voice Mail disconnected.
１０
