iPECS Communicator for iOS
Installation and Operation Guide
Issue 1.2
19
5.2
Media settings
5.2.1
Codecs settings for WiFi
This options allows to select availability and order of codecs for Wifi connections.
5.2.2
Codecs settings for Cell network
This options allows to select availability and order of codecs for Cell network connections.
5.3
SSDP and Trunk Access settings
Trunk Access Code
In order to provide a consistent dialing pattern between
iPECS Communicator
and normal Smartphone
cellular calls, the iPECS host Trunk Access Code can be inserted automatically when dialing an external
iPECS call. The Trunk Access Code is inserted as the first digit when seven or more digits are dialed.
To configure the Trunk Access
1.
Select SSDP from the More screen.
2.
Select Trunk Access Code from the SSDP and Trunk Access Code screen.
3.
Enter the iPECS host Trunk Access Code.
4.
Touch Done to store the data.
Station Start Digit Pattern (SSDP)
When the Trunk Access code is configured and seven or more digits are used in the Station Numbering
Plan of the iPECS host, the client can be configured not to insert the access code when the digit pattern
matches the start digits of a Station number. For this, the client must be configured with the first digits of
stations with more than a six-digit number, the Station Start Digit Pattern. The ‘#’ digit may be entered as
a wild card digit and any digit dialed will be accepted as a match for the ‘#’. Note multiple SSDPs can be
configured when the iPECS host station numbers vary in length. Only the SSDP for station numbers of
seven or more digits need be entered.
To configure the SSDP,
1.
Select SSDP from the More screen.
2.
Select one of the SSDP entries.
3.
Enter the first digits of the Station numbering plan (maximum 4
digits).
4.
Touch Done to store the data.
