iPECS Communicator for iOS
Installation and Operation Guide
Issue 1.2
18
5.1.2
Enable mobile data
As a default,
iPECS Communicator
employs an available WiFi network to register and connect to the
resources of the host iPECS platform. If enabled,
iPECS Communicator
can register and connect to the
host employing the cellular carrier mobile data network. To allow operation of
iPECS Communicator
over the mobile data network, check Enable mobile data.
You must have a mobile data subscription with a service provider and the service must be available.
Using mobile data services for
iPECS Communicator
, you may incur service usage charges.
Note that the QOS when using mobile data cannot be guaranteed.
5.1.3
DNS SRV
DNS SRV
is used to get hostname and port number of SIP server from DNS. Enable this option only
when required by account configuration.
5.1.4
Auto-lock
This option allows to avoid Auto-lock Smartphone when
iPECS Communicator
is used.
You can set this for idle state and in call state.
5.1.5
RX/TX volume boost factor
iPECS Communicator
provides a default volume adjustment for receive audio gain to the Smartphone
earpiece and headset, as well as transmit audio gain for the Smartphone microphone and headset Mic.
One of three levels can be selected for the default audio levels.
5.1.6
Echo cancellation
Enable this option to remove echo from a voice communication in order to improve voice quality.
We recommend to use Software option.
5.1.7
Use VPN if active
Enabling this option will allow dialer to improve NAT mechanisms when using VPN connection.
5.1.8
XML messages
Enable/disable support for XML format in sms messages depending on system type.
