PLDC01938
REVISION 00
01/06/2011
TECHNICAL DEPT.
Stavale
- date 05/09/2011
103/195
B2.5 Replacing the squeegee blades (flaps)
Disassembly
1
Move the machine onto a flat dry area of floor.
2
Turn the ignition key to position "0".
3
Press the pedal to put the parking brake on.
4
Detach the suction hose A from the squeegee.
5
Unscrew the two clamping handles B to remove the squeegee from the squeegee mount.
6
Take the squeegee to the bench.
Rear blade (flap)
The standard blades mounted on the back of the squeegee are made from 8 mm thick
latex to improve their drying performance. Their design is symmetric and they can
therefore be mounted in any position. This enables all four edges of the blade to be
used, extending its working life before it needs replacing definitively.
The blade should be turned every 50 working hours.
7
Unscrew the six (6) outer wing nuts C and the two (2) inner bolts with wing nuts D.
8
Remove the full width blade retainer E and then the rear squeegee blade F.
PHOTO 222
B
A B
C
C
E
F
D
D
PHOTO 223
D
C
D
i