background image

2

DAILY MAINTENANCE

Empty the dirty water drum through the drain 

hose.

Clean the dirty water tank with water or water 

and detergent.

Check the suction filter is undamaged and 

clean.

Check the detergent output filter is undamaged 

and clean.

Clean the brushes.

Check the detergent tank fill filter is undama

-

ged and clean.

Make sure the dirty water tank filter is clean.

Check the squeegee is clean and the blades 

are not damaged.

Check the battery charge shown on the display. 

To charge, insert the battery charger connector 

in the connector under the seat.

REPLACING THE SQUEEGEE BLADES

Front:

• 

unscrew the screws fixing the blade retainer;

• 

remove the blade retainer;

• 

remove the blade;

• 

put the same blade back, reversing the edge in contact with the floor, or replace with a new one;

• 

reposition the blade retainer and fix with the screws;

Back:

• 

unscrew the screws fixing the blade retainer;

• 

remove the blade retainer 

• 

remove the blade;

• 

put the same blade back, reversing the edge in contact with the floor until all four edges are worn, or 

replace with a new one;

• 

reposition the blade retainer and fix with the screws;

AUTOMATIC BRUSH ATTACHMENT

Attaching:

Press the “Click-Off-On” button. The machine first performs a release operation, then immediately afterwards enables the attachment operation. 

Press the “Click-Off-On” button again to automatically attach the brushes. 

Releasing:

Press the “Click-Off-On” button, the machine releases the brushes.

THE MACHINE DOES NOT COME ON/START UP

CHECK THE BATTERY CHARGE

THE SUCTION MOTOR DOES NOT WORK

CHECK THE DIRTY WATER DRUM IS NOT FULL

CHECK THE DIRTY WATER DRUM LEVEL SENSOR IS NOT BLOCKED/MALFUNCTIONING

THE MACHINE LEAVES THE FLOOR WET

CHECK THE SQUEEGEE BLADES ARE NOT WORN

CHECK THERE IS NO DEBRIS BETWEEN THE TWO SQUEEGEE BLADES

CHECK THERE IS NO DEBRIS IN THE SUCTION HOSE

CHECK THE SUCTION FILTER IS UNDAMAGED AND CLEAN

CHECK THE DETERGENT TANK LID IS CLOSED CORRECTLY

CHECK THE SUCTION HOSE IS CORRECTLY ATTACHED TO THE SQUEEGEE

THE MACHINE LEAVES THE FLOOR DIRTY

CHECK THE TYPE OF BRUSH/PAD IN USE IS SUITABLE FOR THE TYPE OF DIRT AND FLOOR

THE MACHINE LEAVES STRIPES OF WET FLOOR

CHECK THE FLOOR HAS BEEN BRUSHED BEFORE USING THE MACHINE

CHECK THERE IS NO DEBRIS BETWEEN THE TWO SQUEEGEE BLADES

CHECK THE SQUEEGEE BLADES ARE NOT WORN

CHECK THE SQUEEGEE IS CORRECTLY ADJUSTED 

PLDC01956

Reviews: