IPC 5008 M, Instruction Manual, Page: 11 / 68

English
- 11 -
Before connecting the steam generator, check that the specifi-
cation given on the rating plate corresponds to that of the mains
electricity supply.
If the appliance is connected via an extension, use cables with
an adequate cross section, never less than 2,5 mm
2
.
The electrical safety of the appliance is guaranteed only when
correctly and efficiently earthed as specified in current electrical
safety legislation (in compliance with the provisions of the IEC
60364-1 standard).
This fundamental safety requisite should be verified. If in doubt,
ask a professionally qualified electrician to check the system
thoroughly.
The manufacturer declines all liability for damage caused by
faulty earthing of the appliance.
The appliance can be disconnected from the mains only by
unplugging the plug from the mains socket.
APPLICATIONS
The appliance must be used exclusively to clean floors, carpet,
fabric, vehicles and washable surfaces in general using the
standard or optional attachments supplied by the manufacturer.
It must always be used in protected environments (sheltered
from rain, snow, etc.). Any other use is considered improper
and/or incorrect.
Examples of improper and/or incorrect use:
• Using the steam generator in the rain.
• Using the steam generator to clean surfaces not suitable for
high temperature steam cleaning.
• Using the appliance to clean animals, people, etc.
• Changing attachments while steam is being emitted.
• Moving the steam generator by pulling the electric cable.
• Using the steam generator with a damaged electric cable.
• Cleaning the steam generator with water jets.
• Cleaning the appliance when plugged into the mains.
• Using the steam generator with wet hands and/or feet.
• Leaving the steam generator unsupervised while running.
• Using the steam generator without the guards (panels,
grills).
• Obstructing ventilation and heat dispersal apertures or
slits.
Use only original accessories offering maximum quality and
security. Failure to use original accessories absolves the manu-
facturer from all liability.
PRELIMINARY OPERATIONS
Unpacking:
After unpacking the appliance, check it is complete and un-
damaged.
If in doubt, do not use the steam generator. Contact your dealer.
Packaging (bags, boxes, nails etc) should be kept out of reach
of children as they may represent a potential hazard. They
should be disposed of or kept according to national environ-
mental legislation.
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
This text has been carefully checked. Should any printing
errors be noted, these should be communicated to the
manufacturer. With the aim of improving the product, we
reserve the right to update this publication without notice.
This booklet may not be reproduced in any form without
the manufacturer’s authorisation.
The most important instructions are marked with the
symbol:
FOREWORD
This publication must be read before setting up, starting and
using the appliance. It is an integral part of the product itself.
Read the warnings and instructions contained in this booklet
carefully. They provide important information on the safe use
and maintenance of the appliance. Pay particular attention to
general safety instructions.
Keep this booklet in a safe place for future consultation.
These steam generators are constructed according to current
safety standards and regulations.
The contents of this booklet should be brought to the attention
of the user.
CLASSIFICATION
The user of this steam generator must respect the specified
operating conditions with particular regard to the following
classification:
This steam generator is classified as a class I appliance in
terms of protection against electric shock.
The steam generator is adjusted in the factory and all safety
devices are sealed. Their adjustment must on no account
be altered .
The steam generator must always be used on solid flat
ground.
Failure to comply with this could constitute a source of dan-
ger.
The steam generator must not be used in corrosive or potentially
explosive atmospheres (vapours or gas).
Electrical connections must be carried out in respect of cur-
rent legislation (in compliance with the provisions of the IEC
60364-1 standard) and in accordance with the manufacturer’s
instructions.
Check that the installation and sockets are adequate for the
maximum power of the appliance indicated on the rating plate
(W).
If in doubt, consult a qualified electrician.
The correct plug should be fitted by a qualified electrician.
The manufacturer declines all liability for damage to persons,
animals or things caused by faulty or incorrect connection.
!
!
!