67
Area Setting
: Click any of the
icons (with the color of your
preference) to enable the creation of motion areas. Begin by drawing the
motion detection frame. Hold and drag the mouse left button to form a block
of shade. Release the mouse button to complete the creation. Click any of
the icons again to discard any motion area which has been made previously.
Sensitivity
: Adjust the
level of the responsiveness defined as
motion detection. The higher number assigned, the more sensitive, vice versa.
Area 1/2/3
: Data of events triggered within the motion area can be assigned
by marking the checkboxes of the source and destination.
Log
: Popped up after
Save to SD card
checkbox is ticked by your mouse.
Check E-mail/ FTP/ Samba checkboxes on the Log option to send the motion
detection log to E-mail/ FTP/ Samba simultaneously.
Subject
: Type in the title for the notification you would receive when an event
is detected. The default title of your notification is
“IP Camera Warning!
”.
Interval
: For example, when selecting
10 sec
, once the motion is detected
and the action is triggered, it cannot be triggered again within 10 seconds.
Based on the schedule
: Assign the schedule timetable arranged from
to enable the function after the option checkbox is ticked.
Tampering Detection
