6
G1~G2
Green (
G1/G2 only
lights up when
operating at
1000M)
Solid
Link is established on the port.
Blinking
Packet transmission or reception is occurring on the port.
Off
No link is established on the port.
SFP1~SFP2
Green
Solid
Link is established or packet transmission is occurring on
the port.
Off
No link is established on the port.
3. Reset Button:
The
RESET
button located on the front panel of the switch can be used to restore switch back to factory default
settings.
Press and hold it for over 5 seconds and then release, the SYS LED will first flash quickly for about 3 seconds and
then regularly, which indicates switch has restarted automatically with factory default settings.
Note:
DO NOT press the
RESET
button unless you do want to delete current settings made on the switch and restore
factory defaults.
Back Panel
The back panel contains the following:
An AC power receptacle for accommodating the supplied power cord
A grounding stud for lightning protection
Figure 2 Back Panel
1.4 Package Contents
Verify that the package contains the following:
1 Switch
4 Rubber Footpads (for tabletop installation)
1 Power Cord
Rack-mount Kit (for installing the switch in a 19-inch rack)
Install Guide
If any item is missing or damaged, contact the place of purchase immediately.
Summary of Contents for F1226P
Page 1: ......
