27
b). View the amount of power supplied to connected PDs and PD class.
If Dynamic Allocation is selected on the Global Settings screen, the Static Allocation field on the Port
Configuration screen will be unconfigurable; if Static Allocation is selected, the Priority on the Port Configuration
screen will gray out and become unconfigurable. Note that Port 25 and port 26 do not support PoE. In static power
allocation mode, each PoE capable port is enabled with 802.3at PoE standard by default, supplying 30w of power.
This 30w of power can only be supplied by the corresponding port to the connected PD and cannot be used by
another port even though there is remaining power. For example, if the PD connected to the port only uses 10w, the
remaining 20w will be wasted instead of being used by another port. We recommend dynamic power allocation and
IEEE 802.3at PoE standard (which is the default PoE standard).
Figure 1
Figure 2
Fields on the screen are described below:
Field
Description
Select Port
Select a port number you wish to configure. Port numbers range from 1 to 24.
PoE Status
Enable/disable PoE. If disabled, the port will not supply power. By default, this option is
enabled.
PoE Standard
The switch supports IEEE 802.3af and IEEE 802.3at PoE standards.
IEEE 802.3af: The original IEEE 802.3af PoE standard provides up to 15.4 W of power to
Summary of Contents for F1226P
Page 1: ......
