652u and 655u User’s Manual
928291
Software Options 5-5
eZ-NDT
Does not support 652u or 655u
Non-Destructive Test Software
eZ-NDT (non-destructive test) uses resonance
to identify part variations caused by process
inconsistencies and defects. Using eZ-NDT with
an IOtech 600 series device is a fast and
inexpensive method for performing 100%
inspection of production parts. Inspection parts
include, but are not limited to: powder metal,
ceramics, and composites.
An eZ-NDT system applies energy to target parts
and analyzes the resonant frequencies. The
system compares the results to the acoustic
signature of a known-good part.
Testing a part takes less than one second and
requires no special tooling, dyes, chemicals,
cleaning, magnetization, or expensive and time
consuming visual inspection equipment.
Features
Provides inspection of metal, ceramic, and hard plastic parts
Removes the ambiguity that is common in other inspection systems
Requires no parts preparation, making the test fast and inexpensive
Tests parts in less than 1 second
Quantifies and documents the first natural frequency for end user
comparison to final assembly resonant frequencies
Time and Spectrum Display
Easy-to-use graphical user interface provides fast setup
Overlay good and bad baselines
Investigation and Inspection Modes
