3-6 Connectors, Indicators, and Cables
989490
652u & 655u Users Manual
Installing the Temperature Connector Shell
1.
Insert tie-wrap through two slots in the
shell-base. Note that you can use two
different slots for the tie-wrap if you
want your wires to extend through the
side of the connector instead of through
the rear, as illustrated.
2. Place the wire/TC connector assembly
onto the shell-base.
Secure the wires with the tie-wrap.
3. Place the hole-plate in the grooves on the
side of the shell-base. If the wires passed
through this opening you would place the
hole-plate at the other opening.
Place the shell-hood over the lower
assembly. It will snap into place.
4. Connect the TC connector to the TC
connection receptacle on the rear panel
of the 655u.
Tie-wrap
Shell-base
TC wires
TC Connector
Shell-base
Hole-plate
Shell-hood
Connect to 655u
