Page 2
VERIFYING COMPATIBILITY
The ILB CP18 HE CW can be used with most LED loads that operate at 20-58 VDC up to a load rating of
18 Watts.
1. The ILB CP18 HE CW series has been evaluated to and found compliant to UL standard 924. The as-installed performance
of system must meet or exceed all Federal, State, and Local code requirements.
2. Refer to Addendum 11042014 for detailed specifications and methods to calculate emergency light levels.
CAUTION: Before installing, make certain A.C. power is off and the IP Rated Test Switch (IPS)
is disconnected.
STEP 1 -
MOUNTING THE ILB CP18 HE CW
Mount the
ILB CP18 HE CW
in the driver/lamp compartment or enclosed wireway so the wire leads are not
exposed, at least ½
″
away from the AC Driver.
Remote Mounting:
When the
ILB CP18 HE CW
is remotely mounted, consult Customer Service for the maximum
allowable distance between the battery pack and the load.
Once the battery is secure
, connect the battery to the unit using the
provided connection wires.
Do NOT install SLA batteries upside down.
The battery must be mounted securely.
If the luminaire doesn’t include
accessories to secure the battery within the luminaire housing, see
page 5
- Recommended Battery Installation Method for Luminaires Without Battery
Installation Accessories.
Never charge or discharge a SLA battery
in a hermetically sealed enclosure.
When
installing in sealed and gasketed luminaires,
a method of proper venting must be
incorporated. Do not place batteries in close
proximity to objects that can product sparks.
INSTALLATION INSTRUCTIONS
STEP 2 -
WIRING TO THE LED LOAD AND NORMAL DRIVER
Refer to the appropriate wiring diagram below. Make sure all connections are in accordance with NEC and any other
local requirements.
ILB CP CW - SINGLE LEAD ACID BATTERY CONFIGURATION - WIRING TO LOAD AND NORMAL DRIVER
ILB CP CW 1LA.EPS
AC (NORMAL)
DRIVER
IOTA ILB CP CW
EMERGENCY DRIVER
LED
LOAD
BLACK
BLACK/WHITE
RED (+)
BLUE/WHITE (-)
RED/WHITE (+)
LED INPUT(-)
LED INPUT (+)
LED OUTPUT (+)
LED OUTPUT (-)
ILB CP CW - SINGLE LEAD ACID BATTERY CONFIGURATION - BATTERY CONNECTIONS
ILB CP CW 1LA.EPS
IOTA ILB CP CW
EMERGENCY DRIVER
BATTERY
RED (+)
BLA
CK(-)
BATTERY (-)
BATTERY (+)
UNIT CONNECTOR
STEP 3 -
INSTALLING THE BATTERIES
