IOS EtherWave User’s Guide
ioSelect Inc.
31-Aug-09
Page 10 of 13
1-858-537-2060
7) The admin page has sections similar to the login page showing radio statistics and device
information plus it adds several new sections. The Device Settings section allows setting the
network information and choosing an RF frequency channel. The default is to allow the
radio to choose its own frequency based on minimizing interference. If you set a fixed
channel, make sure the AP and all SUs use the same one. References to DIPs on this and the
next web page refer to switches inside the radio that are used in the legacy method of
configuration and may be ignored when using the browser method.
If you scroll down in the Admin browser page, you will come to three more sections:
A graphical spectrum analyzer display that may help you to select radio channels that
avoid interference
A section to be used if an update to the units firmware is required
An Advanced Links section with a warning about advanced users only