8
4
Install a compatible Hard Drive into each Drive Tray using (4x) Drive Screws and a Phillips screwdriver.
(Please visit
www.iosafe.com/support
for compatible hard drives models.)
Note:
If you want to set up a RAID set, it is recommended that all installed hard disks are of the same size to make
the best use of hard disk capacity.
5
Insert the loaded hard drive tray into the empty hard drive bay and tighten the screws using the 3mm Hex Tool.
Important:
Make sure the tray is pushed in all the way. Otherwise, the hard disk might not function properly.
