10
Add a RAM Module on your ioSafe
The optional RAM module 2GB (DDR3) is designed for your ioSafe 1513 memory expansion. Follow the steps
below to install, check, or remove a RAM module on your ioSafe.
To install the RAM module:
1
Shut down your ioSafe. Disconnect all cables connected to your ioSafe to prevent possible damage.
2
Remove the 2 screws that secure the bottom access panel.
Important:
When you remove the access panel, you expose sensitive internal components. Avoid touching
anything other than the memory assembly when you remove or add memory.
3
Insert the new memory module in the slot:
a
Align the notch on the gold edge of the module with the notch in the lower memory slot.
b
Tilt the card and push the memory into the slot. Make sure the module is pushed in all the way.
Use two fingers with firm, even pressure to push down on the memory module. You should hear a click when the
memory is inserted correctly.
Important:
Hold the memory module by its edges, and do not touch the gold connectors.
