4
ioSafe at a Glance
No.
Article Name
Location
Description
1)
Power Button
Front Panel
The power button is used to turn your ioSafe on or off.
To turn off your ioSafe, press the Power Button and hold it until you hear a beep
sound and the Power LED starts blinking.
2)
LED Indicators
Front Panel
The LED indicator is used to display the status of the internal disk and the
system. For more information, see "Appendix A: LED Indication Table" on Page
18.
3)
USB 2.0 Ports
Back Panel
The ioSafe offers USB ports for adding additional external hard drives, USB
printers, or other USB devices.
4)
USB 3.0 Ports
5)
eSATA 1
Back Panel
The eSATA ports are used to connect external SATA disks or Expansion Units
1
to the ioSafe.
6)
eSATA 2
7)
RESET Button
Back Panel
1. To restore IP, DNS, passwords for the
admin
account to default value.
2. To reinstall the ioSafe.
8)
LAN Ports
Back Panel
The LAN ports are where you connect RJ-45 cable to the ioSafe.
9)
Power Port
Back Panel
The power port is where you connect the power cord to the ioSafe.
10)
Fans
Back Panel
The fans are built to exhaust waste heat. It will start automatically when the
server starts. If the fan is malfunctioning, the system will beep every few
seconds.
-----
1
For more information about ioSafe Expansion Unit supported by your DiskStation, please visit
www.iosafe.com
.
