ioSafe 1019+ User Manual
3 Install Synology DiskStation Manager
Synology DiskStation Manager (DSM) is a browser-based operating system which provides tools to
access and manage your ioSafe. When installation is complete, you will be able to log into DSM and start
enjoying all the features of your ioSafe powered by Synology. Before getting started, please check the
following:
Your computer and your ioSafe must be connected to the same local network.
In order to download the latest version of DSM, Internet access must be available during installation.
Any ioSafe 1019+ that was shipped with hard drives pre-installed already has Synology DiskStation
Manager installed. If you have drives pre-installed, continue on to Section 4.
a. Turn on the ioSafe 1019+ if it is not already powered on. It will beep once when it is ready to set up.
b. Type in one of the following addresses into a web browser to load the Synology Web Assistant. The
status of your ioSafe should read
Not Installed
.
Synology Web Assistant is optimized for the Chrome and Firefox browsers.
http://iosafe:5000
http://diskstation:5000
PURCHASED WITH HARD DRIVES
PURCHASED WITHOUT DRIVES
http://find.synology.com
CONNECT VIA SYNOLOGY.COM
OR
OR
14
