©Copyright 2009 IonWays, LLC VS.1
Page 2
Installation & Service Manual
Thank you for choosing the IonWays Reverse Osmosis Drinking Water System. With proper care your water
filtration system will produce high quality drinking water for many years.
Read carefully and follow the instructions in this manual before proceeding with the actual installation. Pay
particular attention to all warnings, cautions and notes. Failure to do so could result in personal injury or damage
to the equipment or other property. System and installation need to comply with state and local laws and
regulations. If you have any questions, please contact us at 775-324-2400 option 2.
CHECK LIST:
1.) Reverse Osmosis Unit.
2.) Water storage tank, 6 gallon capacity.
3.) Four colored tubings (black, red, yellow, blue ¼”) 4 feet each color.
4.) Installation kit: tank ball valve, drain saddle valve, feed water valve, faucet assembly.
5.) Manual and warranties.
6.) Optional: Undersink Kit (Sold Separately)
Optional Under Sink Kit
Sold Separately
RECOMMENDED TOOLS LIST:
•
Variable speed drill
•
1/8” and 1/4 “ drill bit ½” and 9/16 open-end wrenches (or adjustable)
•
7/16” drill bit and 9/16 open-end wrench (or adjustable)
•
Phillips screwdriver
•
Utility knife
•
Teflon tape
This reverse osmosis system contains a replaceable treatment component critical for effective reduction of total
dissolved solids. The product water shall be tested periodically to verify the system is performing satisfactorily.
System Tested and Certified by the Water Quality Association against NSF/ASNI Standard 58 for the reduction of
Arsenic, Barium, Cadmium, Copper, Cyst, Hexavalent Chromium, Lead, Radium 226/228, Selenium, TDS,
Trivalent Chromium. Do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that
may contain filterable cysts.