6
© by IONTO-COMED
Installation
1. Install the treatment bed:
)
Stand the bed on a firm, level underground. The bed can be moved easily via
casters.
)
Insert the headrest into the mounting in the backrest.
2. Connect the treatment bed to the main voltage supply:
)
Ensure that the mains power supply corresponds to the voltage (V) shown on
the type plate.
)
Plug the mains power plug into the mains socket.
3. Initialize the treatment bed:
The treatment bed must be initialized at the time of first operation to guarantee
correct function.
)
Press the memory key S and keep it pressed.
−
After 10 seconds a pulsating acoustic tone will sound.
−
All drives will move to their end position.
−
Once the last drive has reached its end position, the acoustic tone will
cease.
)
Release pressure on the memory key S.
The treatment bed is now ready for use.
Operation IONTO-COMFORT XTENSION 4/4S (4-MOTORS)
Caution!
Risk of pinching!
The arms of the client must remain on the bed during adjustment of the
reclining position.
Note
Do not allow that oil or any care products come in contact with the
upholstery because this can damage it.
We recommend the use of an upholstery protection, e.g. a towelling
cover.
If oil comes in contact with the upholstery, remove immediately.
Set Reclining Position
1. Armrest adjustment:
Caution!
Danger of injury!
Do not allow the armrests to fall downwards.
Both Armrests (3) can be folded downward.
)
Raise the armrest lightly.
)
Fold the armrest downwards.
Raise armrests:
)
Lift the armrest.
)
Fold the armrests back forward again.
2. Headrest adjustment:
The head rest (1) is removable and can be tilted to the front or back.
)
Pull the headrest up vertically to the desired position.
