ION-R100
– User manual
Page 21 of 40
By factory default, the ION-R100 is configured as a single video stream decoder in a 1x1 output
layout. In this mode, the ION-R100 is capable of connecting to a single H.264/MJPEG IP video
source only, which it will decode and display in full screen on the configured output connector
(BNC or HDMI). However, this is the only mode in which the ION-R100 will be able to decode
an HD video source in resolutions up to 1080p30/720p60.
The output layout can however be changed using the
Output Layout
parameter. The other
possible layouts are
2x2
or
sequence
, which both enable use of up to four (4) video stream
decoders simultaneously.
When the output layout is set to
2x2
or
sequence
, four (4) video streams decoders are made
available and can all decode and display simultaneously. In this mode, the ION-R100 is capable
of connecting to four H.264/MJPEG IP video sources simultaneously, which it will decode and
display in either a tiled 2x2 layout or full screen sequence on the configured output connector
(BNC or HDMI). However, this mode limits the supported video source resolutions to D1 for
each of the four video stream decoders.
