IONODES ATOMAS-MINI-DUAL, User Manual

Page: 26 / 56

26
support@ionodes.com | https://imaging.ionodes.com | 1-450-696-1060
•
Set the device’s Time Zone ; based on this setting, as well as the current UTC time, a local time is
calculated and displayed . The button “Resynchronize Device’s Time” will force a time synchronization
between the encoder ’s internal clock and the local system that is used to open the web interface.
•
Activate CPU Throttling ; this feature aims to reserve a part of the CPU’s processing resources for critical
tasks, like handling PTZ commands. This is achieved by reducing the video quality during a short period
when the CPU load is too high. After the CPU load decreases, the video quality is restored automatically.
•
Set the device’s Security policy. Here the user can define the minimum & maximum length of the
password for all user accounts. By validating the option “ Enable Protection for Multiple Login Failures ”,
the device is instructed to block all login attempts after X failed ones, until the timeout of Y seconds runs
out ( X and Y are user-configurable).
• Set Thermal Shutdown thresholds; these are used for controlling the behaviour of the platform when
very high operating temperature conditions are encountered (which can otherwise affect the platform ’s
reliable operation). The encoder will enter RESET mode when the shutdown temperature is reached and
remain in this state until the temperature drops below the recovery temperature.
•
System Features ; a list of the features supported by the system, along with their dependencies (if
applicable), is presented to the user. Based on the application/project where the encoder is being used,
some features considered irrelevant may be disabled. For each feature, a brief description is provided.
Warning: If your thermal shutdown thresholds are not correlated with the thermal performance of your
cooling solution, the platform may experience unstable operation, so please use this feature very
carefully and apply it in the field only after extensive qualification in the lab!
8.2.3 Configuration / Network