ionmax ION622, User Manual

Page: 7 / 16

OFF
( INDICATOR OFF)
OPERATING INSTRUCTIONS
Connect the power plug to the appropriate electrical outlet.
Press the ON / OFF button to turn the appliance ON.
The LCD panel will light up.
If the unit has been switched off and on again, it will resume operation with the
settings for mode, humidity and backlight from its last use. Only the timer setting
will be reset to zero.
If the power is restored after a power failure, the unit (including the timer) will resume
operation at the settings that were selected prior to the power failure.
To switch off the unit, press the ON / OFF button first before unplugging the power
plug from the electrical outlet.
ON and OFF
Press to set timer from 1 to 24 hours or off (the indicator will switch off).
After setting the timer, the indicator and digits on the LCD panel will blink for
5 seconds and then return to display the room humidity level.
The indicator lights up only when the timer has been set.
Press the button once to check the time remaining.
TIMER MODE
1H 2H ... 24H
5