IONIC Zero PPB, Operator'S Manual

Page: 4 / 54

Zero PPM and PPB System
4
Welcome
Congratulations you are the proud owner of the Worlds most advanced yet user-friendly water
fed pole system for window and solar panel cleaning.
When it comes to everyday electronic products that we are all used too, most people manage
to get by without ever reading the ‘Instructions’ past the first few lines. But if you have read
this far then you are strongly advised to read on.
Generally, there are those who read instructions and follow simple maintenance procedures,
and those who do not. Those who take the time to follow these instructions usually enjoy
many years of service and avoid unexpected repair bills. For the other group the opposite is
true. The machine you have purchased is a water filtration system with multiple filters that
work together as a team to produce ultra pure water from any suitable potable water supply
anywhere in the World. Each and every Reach & Wash™ machine is thoroughly tested before
it leaves our manufacturing facility. Unlike electricity however, water differs from place to
place. Certainly water is water however, its delivery pressure, flow and quality changes
sometimes significantly within short distances and even at different times of the day.
Furthermore water density changes with the seasons, water is at its most dense at 4 degrees.
In winter the performance of a filter system will be different to the summer.
Ionic Systems is not responsible for your local water supply; we have no control over its
quality, delivery pressure or flow rate. Further we have no control over how you use the
machine or whether it is operated, serviced or maintained correctly. The following pages
provide guidance as well as instruction. There is a solution (usually simple) to each and every
problem that you may encounter and we have done our best to advise you well in the pages
that follow.
If you have read this far then you are encouraged to read to the end and follow the guidance
and simple maintenance procedures. If you will not be the routine operator of the machine
and you have purchased it for your staff to operate then you are encouraged to put ‘standard
operating procedures’ in place for your staff to follow.
The automated filtration system of the Zero™ PPB Reach & Wash™ System produces pure
water that is 1,000 times purer than machines that produce water of 0ppm quality. Although
the Zero™ PPB Reach & Wash™ System has 1,000 times more cleaning power than
conventional water fed pole cleaning systems, it is still important to follow the correct cleaning
procedure set out on pages 46-51.
The machines ability to produce 0ppb water is wholly dependent on the timely replacement of
filters. Failure to replace filters as necessary will reduce the machines ability to produce 0ppb
water leading to a poor window cleaning finish, customer complaints, lost profits and higher
maintenance costs. Information about filter replacement can be found on page 32.