6
Preparing the Computer
Preparing the Computer
Preparing the Computer
Preparing the Computer
Preparing the Computer
1
Remove any CD-ROM disks or floppy disks from the
computer's drives, turn
off
the power switch, and
disconnect
the power cord.
WARNING:
Always disconnect computer electrical power at the power source before
beginning any computer hardware change.
2
Remove the computer cover.
(Most computers have three or four screws on the rear panel that hold the cover. Refer
to your computer manual if removal is unclear.)
Disconnect power
3
Locate a vacant 5
1
/
4
-inch drive bay. Remove the plastic
cover and, if necessary, the metal shield.
Metal Shield
Plastic Cover
51/4-inch Bay
Tower View
Metal
Shield
Plastic
Cover
51/4-inch Bay
Summary of Contents for Ditto Tape Drive
Page 2: ......
