22
Ioline
Figure 14. The Calibration Box and Measurements.
5. Take the average of the horizontal (Y) values by adding them together
and dividing by 2. Repeat this procedure for the vertical (X) values.
Example:
If X1 = 39.750 in. and X2 = 39.700 in.
The sum is 79.450 in. (39.750 in. + 39.700 in. = 79.450 in.).
The average is 39.725 in. (79.450 in. / 2 = 39.725 in.)
The X calibration value is the average, 39.725 in.
Enter the Calibration Data:
1. Enter the measured values in the boxes in the Calibration window. Make
sure the signcutter is in Start mode (green LED). Select the Set Calibra-
tion button.
2. The signcutter will send the calibration values and the new Calibration
Setting will be displayed in the boxes in the window.
3. Click on Done when finished.
~40 in.
Y1
Y2
X1 X2
BLANK
