8
Internet Connection
iPod / iPhone / iPad
Router Mode Setting
Follow the steps below to setup the NetShair Nano for Router
Mode. If you are unsure about which mode to use, see Router
Mode or AP Mode (page 5) to confirm the proper setting.
1. Make sure the “NetShair_Nano_XXXX” Wi-Fi network is
connected. Open the NetShair Nano App.
2. On the Home screen, tap
Advance Setting
.
3. Tap the
Set Operation Mode
button
4. Select
Router
for the Operation Mode.
5. A notification saying your settings
have been saved will appear,
tap
Later
to continue without the
NetShair Nano rebooting.
DHCP Setup
continue to page 9
DSL Modem
Setup
continue to page 10
Summary of Contents for Q1376
Page 30: ...2014 IOGEAR...
