17
5. After the NetShair reboots, connect an Ethernet cable.
The Network LED indictor will light solid once a successful
connection has been made.
6. Connect back to NetShair_Nano_XXXX
Wi-Fi network. Go to a website and the Internet will be live.
Access Point Mode Setting
Follow the steps below to setup the NetShair Nano for AP
Mode. If you are unsure about which mode to use, see
Router Mode or AP Mode (page 5) to confirm the proper
setting.
1. Make sure the “NetShair_Nano_XXXX” Wi-Fi network is
connected. Open the NetShair Nano App.
2. On the Home screen, tap
Advance Setting
.
3. Tap
Set Operation Mode
and then
Access Point
.
4. Tap
Restart
to save settings.
Summary of Contents for Q1376
Page 30: ...2014 IOGEAR...
