IOGear GWP512, User Manual

Page: 48 / 84

45
Configuration Utility
• Transmit Key 1-4: These four fields allow you to
set four different 40-bit or 104-bit keys for
encryption. This item is a very convenient and
useful function when you want to match the WEP
keys with different APs. After setting the WEP
keys for specific AP or wireless LAN card, instead
of entering the WEP key every time, you can just
click the button in front of WEP key to enable the
association.
Protocol:
• Do not change settings:
If the box is checked, then, all settings on this tab
can’t be change.
• Use below settings:
- Power Save Mode: This field provides two
options of power management: Continuous
Access and Max Power Save. Click the pull-down
menu to select the mode you desire.
- Preamble (802.11b): Select Auto or Long. The
default setting is Auto.
- Transmit Rate: This field provides options for
selecting data-transmitting rate of the wireless
LAN adapter. You can click the down-arrow button
to select one option. By default, the data rate is
set to Auto allowing Tx rate to the highest
possible rate. It’s recommended that you select
the Auto option.