HDMI IN
HDMI IN
Y/Pb/Pr
Video
RGB
S-Video
HDMI
18
4. During warm-up, the transmitter’s and the receiver’s wireless status LED will blink green
until the signal link between the transmitter and the receiver is established. It will take
approximately 15 ~ 20 seconds for system to fully boot-up successfully.
5. Ensure your TV or projector is in “HDMI input” mode.
6.
When the GWHDMS52MB is powered on for the first time, the input default is set to
Source 1. Note that anytime a source input is switched, it will take approximately 15~20
seconds for the image to appear. There are 3 ways to switch between connected source
devices:
