IOGear GHSW8441, User Manual

Page: 15 / 32

14 15
Operation
You can operate the GHSW8441/GHSW8481 using the pushbuttons on the front panel, the IR remote control unit,
or an RS-232 serial controller. Below is a table of operation offered between each mode.
Action
Operation Methods
Panel Pushbuttons IR Remote Control Unit Serial Controller
Switch the port
Switchthedisplaytoaspecificsource
✔ ✔ ✔
Switch to the next available port
✔
Switch to the previous available port
✔
Set the switch mode
Enable the off mode
✔ ✔
Enable the next mode (default)
✔ ✔
Enable the priority mode
✔
Enable/disable the POD mode
✔
Other settings
Enable/disable the stanby mode
✔
Read (display) the device settings
✔