IOGear GHSW8241, User Manual

Page: 14 / 20

14
Hot Plug Detect Command
When enabled, Hot Plug Detect (HPD) will force the connected source
device to read the display’s EDID information. The EDID contains a
display’s basic information and is used by the source device to utilize the
best resolution across different displays.
The formulas for HPD commands are as follows:
1.
HPD C [Enter]
- For example, to enable Hot Plug Detect, type the following: hpd on
[Enter]
The following tables show the possible values and formats for the Hot Plug
Detect (HPD) formulas:
Command Description
Hpd Hot Plug Detect command
Control Description
on Enables Hot Plug Detect
off Disables Hot Plug Detect
(default)
The following table lists the available Switch Mode Commands:
Command Input Port # Control Enter Description
swmode
default [Enter] To use the Default
Switch Mode
next [Enter] To use the Next Switch
Mode
i xx auto [Enter] To use the Auto Switch
Mode for port #
goto on [Enter] To enable the Go To
function
goto off [Enter] To disable the Go To
function