IOGear GHSW8241, User Manual

Page: 10 / 20

10
Switch Port Commands
The formulas for Switch Port commands are as follows:
1.
Switch C Input C Port [Enter]
- For example, to switch to input port 02, type the following:
sw i02 [Enter]
2. Switch C Enable / Disable HD Out + [Enter]
- For example, to disable the HD output signal, type the following:
sw off [Enter]
3. Switch C Port Sequence (+ / -) + [Enter]
- For example, to switch to the next input port (+), type the following:
sw + [Enter]
Note: Each command string can be separated with a [Space].
The following tables show the possible values and formats for the
Switch Port
formulas:
Serial Port (RS-232) Configuration List
Command Description
sw Switch Command
Port Number Description
xx 01-04 (default is 01)
Control Description
on Enable HD Output Signal
off Disable HD Output Signal
+ Port Sequence – Next Port
- Port Sequence – Previous Port
Input Description
i Input Command